For my purposes, it's solved. But if you use WEP or no wifi security, there would need to be changes.
I posted this at mini-modding, but I'm replicating it here as well:
In the /tmp/hddmedia/wpa.conf file I have the following (replaced 'thessid' with the SSID used, and 'thepassphrase' with the passphrase used:
wpa.conf
ctrl_interface=/tmp/net/wpa_supplicant
ctrl_interface_group=root
network={
ssid="myssid"
proto=WPA RSN
key_mgmt=WPA-PSK
pairwise=TKIP CCMP
group=TKIP CCMP
psk="thepassphrase"
}
since the interface is at /tmp/net I have to create the directory. And since the file is stored on the 4th partition, I also needed to mount that. Also, I wanted to make sure the wired LAN was also recognized if present. So here's what is at the beginning of my /usr/local/etc/rcS file:
/usr/local/etc/rcS
mount /dev/ide/host0/bus0/target0/lun0/part4 /usr/local/etc/dvdplayer/hdd/volumes/HDD1
ln -s /usr/local/etc/dvdplayer/hdd/volumes/HDD1 /tmp/hddmedia
mkdir /tmp/net
echo 'nameserver 127.0.0.1' > /etc/resolv.conf
udhcpc -p /var/lock/udhcpc_eth0.pid -t 15 -b -s /etc/udhcpc.script -i eth0
modprobe ehci-hcd
modprobe ohci-hcd
sleep 2
ifconfig wlan0 up
iwconfig wlan0 essid "myssid"
wpa_supplicant -P/var/lock/wpa_supplicant.pid -D ipw -c /tmp/hddmedia/wpa.conf -i wlan0 -B
udhcpc -p /var/lock/udhcpc_wlan0.pid -t 15 -b -s /etc/udhcpc.script -i wlan0
The second udhcpc takes about 30 seconds to run, and then it still doesn't start responding to pings until after another minute has passed.
Now I'm sure there's going to be a better way to do what I've listed above. Like do we really need to have udhcpc staying as a running process after it has assigned the IP address? I don't know. But this is a starting point that works at least.
There is a script already on the ScreenPlay in the /etc directory called udhcpc.script. It's already there, but for reference here is the listing:
/etc/udhcpc.script
#!/bin/sh
# udhcpc script edited by Jason Lee
[ -z "$1" ] && echo "Error: should be called from udhcpc" && exit 1
RESOLV_CONF="/etc/resolv.conf"
DHCP_OK="/var/lock/dhcp.ok"
DHCP_OK2="/var/lock/dhcp."
[ -n "$broadcast" ] && BROADCAST="broadcast $broadcast"
[ -n "$subnet" ] && NETMASK="netmask $subnet"
case "$1" in
deconfig)
/sbin/ifconfig $interface 0.0.0.0
;;
renew|bound)
/sbin/ifconfig $interface $ip $BROADCAST $NETMASK
if [ -n "$router" ] ; then
echo "deleting routers"
while route del default gw 0.0.0.0 dev $interface ; do
:
done
for i in $router ; do
route add default gw $i dev $interface
done
fi
echo -n > $RESOLV_CONF
# [ -n "$domain" ] && echo search $domain >> $RESOLV_CONF
[ -n "$domain" ] && echo domain $domain >> $RESOLV_CONF
for i in $dns ; do
echo adding dns $i
echo nameserver $i >> $RESOLV_CONF
done
echo ok > $DHCP_OK
echo ok > $DHCP_OK2$interface
;;
esac
exit 0
Selasa, 09 Maret 2010
Jumat, 05 Maret 2010
RootApp and Wifi
Played around with the RootApp. Noticed that if you run RootApp with a -1 DvdPlayer then it will execute the specified program once, go to sleep after the program exits, then when you turn it back on it will resume and exit the RootApp watchdog program. Also, if you do RootApp -s then it won't execute any program, but will immediately put the player to sleep. When you power on, it wakes up and...reboots. But if you combine them doing -s -1 then when you power back on, it will resume and exit from RootApp.
I've also worked on trying to understand the wifi. When you disable the DvdPlayer from starting up, it doesn't mount the media partition or link the media drive to /tmp/hddmedia. It also doesn't configure the network/netmask and gateway for the wired or wireless connection.
At the beginning of the rcS file in the /usr/local/etc is the instructions for doing the network config, so I just adapted it for mine and added drive mounting and linking.
ifconfig eth0 192.168.0.2 netmask 255.255.0.0
route add default gw 192.168.0.1
mount /dev/ide/host0/bus0/target0/lun0/part4 /usr/local/etc/dvdplayer/hdd/volumes/HDD1
ln -s /usr/local/etc/dvdplayer/hdd/volumes/HDD1 /tmp/hddmedia
And of course I took out the RootApp DvdPlayer command so that it wouldn't activate the DvdPlayer. This has left two things for me to solve. #1) How to control the blue light. It continues to flash after booting, and the bootscreen stays up. Well, the HelloWorld can take care of the bootscreen, but figuring out what controls that power light has been more difficult. #2) Wifi does not get set up.
First run
/usr/local/etc/dvdplayer/script/run_tail
which installs the ehci-hcd and ohci-hcd modules using modprobe.
I think it also needs:
/sbin/modprobe ieee80211-rtl
/sbin/modprobe ieee80211_crypt
I found this info in the Main DvdPlayer as well:
/bin/echo nameserver 127.0.0.1 >> /etc/resolv.conf
ifconfig wlan0 up
wpa_supplicant -P/var/lock/wpa_supplicant.pid -D ipw -c /tmp/net/wpa.conf -i wlan0 -B
wpa_cli -p /tmp/net/wpa_supplicant status > /tmp/net/WPA.STATUS;touch /tmp/net/WPA.OK
The /tmp/net/wpa.conf file is added when DvdPlayer runs, but it looks something like this:
ctrl_interface=/tmp/net/wpa_supplicant
ctrl_interface_group=root
network={
ssid="MySSId"
proto=WPA RSN
key_mgmt=WPA-PSK
pairwise=TKIP CCMP
group=TKIP CCMP
psk="your wifi passphrase"
}
I've extracted information and found a webpage about setting up which has helped.
http://wiki.archlinux.org/index.php/WPA_supplicant
But I'm actually stuck at ifconfig wlan0 up. wlan0 isn't there. The light doesn't come on in the wifi adapter so I think the port needs to activate power or recognize the device or something similar. NetworkSet.cpp (can be found in Conceptronic sources) gives some hints but I haven't understood it yet. Anyway, that's what I'm working on now.
I've also worked on trying to understand the wifi. When you disable the DvdPlayer from starting up, it doesn't mount the media partition or link the media drive to /tmp/hddmedia. It also doesn't configure the network/netmask and gateway for the wired or wireless connection.
At the beginning of the rcS file in the /usr/local/etc is the instructions for doing the network config, so I just adapted it for mine and added drive mounting and linking.
ifconfig eth0 192.168.0.2 netmask 255.255.0.0
route add default gw 192.168.0.1
mount /dev/ide/host0/bus0/target0/lun0/part4 /usr/local/etc/dvdplayer/hdd/volumes/HDD1
ln -s /usr/local/etc/dvdplayer/hdd/volumes/HDD1 /tmp/hddmedia
And of course I took out the RootApp DvdPlayer command so that it wouldn't activate the DvdPlayer. This has left two things for me to solve. #1) How to control the blue light. It continues to flash after booting, and the bootscreen stays up. Well, the HelloWorld can take care of the bootscreen, but figuring out what controls that power light has been more difficult. #2) Wifi does not get set up.
First run
/usr/local/etc/dvdplayer/script/run_tail
which installs the ehci-hcd and ohci-hcd modules using modprobe.
I think it also needs:
/sbin/modprobe ieee80211-rtl
/sbin/modprobe ieee80211_crypt
I found this info in the Main DvdPlayer as well:
/bin/echo nameserver 127.0.0.1 >> /etc/resolv.conf
ifconfig wlan0 up
wpa_supplicant -P/var/lock/wpa_supplicant.pid -D ipw -c /tmp/net/wpa.conf -i wlan0 -B
wpa_cli -p /tmp/net/wpa_supplicant status > /tmp/net/WPA.STATUS;touch /tmp/net/WPA.OK
The /tmp/net/wpa.conf file is added when DvdPlayer runs, but it looks something like this:
ctrl_interface=/tmp/net/wpa_supplicant
ctrl_interface_group=root
network={
ssid="MySSId"
proto=WPA RSN
key_mgmt=WPA-PSK
pairwise=TKIP CCMP
group=TKIP CCMP
psk="your wifi passphrase"
}
I've extracted information and found a webpage about setting up which has helped.
http://wiki.archlinux.org/index.php/WPA_supplicant
But I'm actually stuck at ifconfig wlan0 up. wlan0 isn't there. The light doesn't come on in the wifi adapter so I think the port needs to activate power or recognize the device or something similar. NetworkSet.cpp (can be found in Conceptronic sources) gives some hints but I haven't understood it yet. Anyway, that's what I'm working on now.
Sabtu, 27 Februari 2010
Cursor, Navigation, Free Memory w/o resetav
Tonight I figured out how to set the graphics of the cursor. According to a system .x file in the common directory, the cursor is 32 x 32 x 2 bit color. So while I was direct drawing on the screen, I told it to use the same memory for the cursor. And it sure did. Color still seems limited to shades of green. But who knows, it may come in handy somewhere.
Also figured out how to navigate through a movie. I found out that the very routine that gives you how much time has elapsed in the movie also gives you the amount of time in the movie. Was able to jump around to the menu, move the menu selection, and activate it. All done through commands, not via the remote. Should be pretty easy to hook up to the remote once I want to, since I've previously figured out how to interact with the remote.
I was very concerned about calling the resetav all of the time. It would take the video bios and audio bios and put the information back in flash memory. Well, that's a problem if you do it too often. yet, it was the only way I could figure out how to recover once I displayed information on the screen. Well, that's no longer a necessity. It is still required if another program has done it, but mine seems to be able to recover from my own now. Can get all of the layers freed up and shut off.
This has all been pushed out to the git repository.
Also figured out how to navigate through a movie. I found out that the very routine that gives you how much time has elapsed in the movie also gives you the amount of time in the movie. Was able to jump around to the menu, move the menu selection, and activate it. All done through commands, not via the remote. Should be pretty easy to hook up to the remote once I want to, since I've previously figured out how to interact with the remote.
I was very concerned about calling the resetav all of the time. It would take the video bios and audio bios and put the information back in flash memory. Well, that's a problem if you do it too often. yet, it was the only way I could figure out how to recover once I displayed information on the screen. Well, that's no longer a necessity. It is still required if another program has done it, but mine seems to be able to recover from my own now. Can get all of the layers freed up and shut off.
This has all been pushed out to the git repository.
Selasa, 23 Februari 2010
MP3 and LED
I've pushed out the changes so that MP3s can now be played, and that recording light was being turned on by the "setAVModeSCART" function, which made it very easy to track down what GPIO was controlling that light. Especially after I noticed that the light came on after the shutdown VideoPlayback process happened. So I just backtracked from the endin gof the program, commenting stuff out and rebooting (to turn off the light) until the light didn't come on.
Senin, 22 Februari 2010
Direct screen control
I am now able to control every pixel on the screen. Apparently they chose the R5G6B5 bitmap format for a reason -- it's the native storage format for the screen.
DG_GetSurfaceDesc (m_hSurface, &surfDesc);
DG_Lock(m_hSurface, 0, 0, unitRect.width, unitRect.height, 0);
x = horizonal value from 0 - 1920 (for 1080I)
y = vertical value from 0 - 1080 (for 1080I)
*((uint16_t *)((uint8_t *)surfDesc.lpsurface + (y*surfDesc.lPitch)) + x) = 0xffff;
// format is r5, g6, b5
DG_Unlock(m_hSurface);
edit: It was quite easy to switch it to a higher color format by just changing it from Format_16 to Format_32 when the surface was being created. It does not affect the video, it only applies to the overlay surfaces. But the SDK has Format_16 as the default, possibly inserted there by Ellion.
DG_GetSurfaceDesc (m_hSurface, &surfDesc);
DG_Lock(m_hSurface, 0, 0, unitRect.width, unitRect.height, 0);
x = horizonal value from 0 - 1920 (for 1080I)
y = vertical value from 0 - 1080 (for 1080I)
*((uint16_t *)((uint8_t *)surfDesc.lpsurface + (y*surfDesc.lPitch)) + x) = 0xffff;
// format is r5, g6, b5
DG_Unlock(m_hSurface);
edit: It was quite easy to switch it to a higher color format by just changing it from Format_16 to Format_32 when the surface was being created. It does not affect the video, it only applies to the overlay surfaces. But the SDK has Format_16 as the default, possibly inserted there by Ellion.
Minggu, 21 Februari 2010
MPG, Dvd, ISO, and JPG now working
Latest adjustments to the HelloWorld-JC program now include the ability to playback MPG, Dvd files, and automatically mount ISOs. I was also able to extract some code for having the chip render JPG. I was concerned that the method used for decoding the JPG was to pass the information via RPC to the chip. I figured that would interfere with the playback. Turns out, it doesn't! Since all of the decoding is done on the chip, the processor continues to be free to read and unpackage the media it is streaming.
Minggu, 14 Februari 2010
After nearly a month of having to work until late night to finish my project at work until I finished it Friday, I finally got a chance last night and tonight to continue hacking on the ScreenPlay. And the verdict? Success!
It's pretty limited right now. I've added several files and I'm still very dependent upon the library...For simplification, I've got only the AVI file types working right now (with corresponding audio). I now have the Hello World start up with a hard coded AVI filename that it launches and then it overlays the video screen with a translucent "Hello World", along with the cursor that continues to display as a green block (and the graphic structure still mystifies me).
Right now, it plays the video for about 10 seconds and then kicks out. Look at the main2.cpp program for more info. As always, I have checked this into the git repository on opensphd.sourceforge.net.
It's pretty limited right now. I've added several files and I'm still very dependent upon the library...For simplification, I've got only the AVI file types working right now (with corresponding audio). I now have the Hello World start up with a hard coded AVI filename that it launches and then it overlays the video screen with a translucent "Hello World", along with the cursor that continues to display as a green block (and the graphic structure still mystifies me).
Right now, it plays the video for about 10 seconds and then kicks out. Look at the main2.cpp program for more info. As always, I have checked this into the git repository on opensphd.sourceforge.net.
Langganan:
Postingan (Atom)